Canon issued a product advisory for the new EF 40mm f/2.8 STM lens. The AF may stop working when enough pressure is applied to the lens barrel while attached to a camera.
The current fix is to remove the lens and reattach it. A firmware update should be available soon to fix the problem altogether.
I haven't experienced this problem yet.
You can read the full product advisory below.
Canon USA Product Advisory
To Users of the EF40mm f/2.8 STM Interchangeable Lens for Canon Digital SLR Cameras
Thank you for using Canon products.
It has been confirmed that the autofocusing function of the EF40mm f/2.8 STM lens, which was released in June 2012, may not operate correctly.
The details of this phenomenon are described below.
EF40mm f/2.8 STM
If pressure is applied to the lens barrel while the lens is mounted to the camera (pressure can be applied even while attaching the lens cap or while carrying the camera with the lens attached in a bag), the autofocusing function of the lens may stop working.
*This phenomenon does not occur during normal shooting.
*This phenomenon does not result in a malfunction of the lens.
When the above phenomenon occurs, detach and reattach the lens, or remove and reinsert the camera battery to restore the operations.
The firmware to address this phenomenon will be available for download in late August, 2012.
Once this firmware is ready, we will make an announcement on our Web site.
This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.
Please register your EF 40mm f/2.8 STM. By registering, we will be able to notify you via email when service updates…
Most Users Ever Online: 464
Currently Browsing this Page:
Towab Muhammad Yusuf: 5
Kortney Jarman: 2
Guest Posters: 1130
Newest Members: Erik Hawkinson, DiverBW, chipscarpenter, Towab Muhammad Yusuf, Randy Ilowite, Jerry, Joel, remektek, hayleynealrgyx, amy chen
Administrators: Eric Reagan: 2543