Canon has released a firmware update for the Canon EOS-1D Mark III. This firmware update (Version 1.1.3) incorporates the following improvements and fixes.
- Increases transmission speed when using high-speed SD cards.
- Fixes a phenomenon involving not being able to release the shutter.
- Improves AF tracking in specific conditions.
- Corrects errors in the Spanish and Korean menu screens.
The Version 1.1.3 firmware being released this time is for cameras with firmware up to Version 1.1.1. If the camera’s firmware is already Version 1.1.3, it is not necessary to update the firmware.
Version 1.1.3 is available for download now via the Canon Japan website.
[tags]canon, 1d, mark iii, firmware, update, af tracking, speed, sd, card, shutter release[/tags]
Larry Kirtley says
How do I go about updating my Mark 3 with the latest firmware update?
If I take it to Canon in Toronto Ontario I will be without my camera for at least 2 weeks.
There must be an easier way.
I am stumpped.
Larry
Eric says
Larry,
You can do it yourself. Click the Canon Japan link above. In the Q&A from Canon:
Q : How do I update the firmware?
A : It can be updated by copying the downloaded file to an initialized (formatted) CF card (SD card) by the EOS-1D Mark III, and then loading the card in the camera. Please refer to the PDF file at the end of this page for more details.
Please note the following when updating:
* Do not turn off the main switch of the camera during the firmware updating process. When using household AC power supply, be careful of power failure.
* Also, do not open the memory card slot cover or press any button, dial, or switch. If the camera’s power supply is interrupted during firmware updating, the firmware may not load properly and the camera may require repairs before it can be used again.
Additionally, see this .pdf file:
http://web.canon.jp/imaging/dc/PDF/eos1dmk3_fib-e.pdf
Good luck.
Eric